DescriptionProduct DescriptionCompatible with Ø2inch (Ø50.8mm) optical components on the optical axis; works with 60mm cage systemsProvides ±3°tilt and pitch adjustment rangeThrough holes for mounting Ø6mm cage rodsM4 threaded holes on three sides for post mountingThe mount enables ±3° of pitch and tilt adjustment for optical components. Adjustment is driven by three 100 TPI (Threads Per Inch) screws for smooth, highresolution motion. These adjusters feature locking collars and removable knobs. ItemCage Adjustable Mirror MountCage Adjustable Mirror MountModelMCT2MCS2ADimensions88.988.945.2mm88.988.945.2mmBoreSM2 (2.035”40)Ø50.9mmAdjustment Range±3° pitch & tilt±3° pitch & tiltThroughhole SpacingØ6.02mm, 60×60mmØ6.02mm, 60×60mmWeight295.9g295.5gMaterial7075 Aluminum Alloy7075 Aluminum AlloyTechnical Description(1) The mount provides ±3° of pitch and tilt adjustment for optical components. Three 100 TPI adjustment screws deliver smooth, highresolution positioning. All adjusters include locking collars and removable knobs.(2) MCT2 has SM2 (2.035”40) threads and uses one SM2 retaining ring plus one Ø2inch spacer to secure optics. By contrast, MCS2A holds optics with nylontipped setscrews, tightened with a 2mm hex wrench or ballhead screwdriver.(3) Both mounts accept Ø2inch (Ø50.8mm) optics. MCT2 accommodates thin optics (thickness ≤6.5mm). MCS2A is designed for thicker optics (minimum thickness 5mm).(4) The mount has four Ø6mm through holes compatible with PCMS cage rods. Four side locking screws secure the rods, tightened with a 1.5mm hex wrench or ballhead screwdriver.(5) Three sides each have M4 threaded holes for post mounting in freespace setups. AssemblyApplication ExamplesEngineering DrawingsMC-T2 Engineering DrawingMC-S2A Engineering Drawing
