DescriptionProduct DescriptionQuick-connect clamp mount for 30 mm and 60 mm cage systemsEnables easy insertion and removal from cage systemsSingle locking screw on the clamp for fast, simple locking of cage assembliesCan be mounted on a Ø25 mm post with a post clamp blockAllows fast, stable setup of cage systemsThe clamp mount is designed for 30 mm and 60 mm cage systems respectively. Two parallel cage rods are inserted into the mount and secured with a single screw. The entire cage system can be supported by a single post. A 3/16 in (5 mm) ball-end screwdriver is used to tighten the high-stability flexible locking mechanism, fixing the mount to the Ø25 mm post.Technical Description(1) Four M4 screws can be installed into the Ø4 mm, 20 mm long counterbored holes to secure the mount to a post clamp block (cage post clamp blocks available separately). The top is secured with a single screw; a ball-end screwdriver tightens the high-stability flexible locking mechanism to firmly attach the mount to a Ø25 mm post.(2) This is a kit with a quick-release handle for fast adjustment of the clamp mount. The handle is used to lock the clamp block to the post. Handle length: 2.36 in (60 mm), with a 1/4″-20 (M6) bolt for direct twist installation, reducing setup and alignment time for adjusting the clamp mount.(3) 30 mm clamp mount dimensions: 46 mm × 35 mm60 mm clamp mount dimensions: 76 mm × 35 mmUses a threaded bar and spring drive for quick, convenient fastening.AssemblyApplication ExamplesEngineering DrawingsM5-16 Engineering DrawingCSK-A60 Engineering DrawingCSK-A30 Engineering DrawingCFP-A25 Engineering Drawing
