DescriptionProduct DescriptionSuitable for light beams with diameter ≤5mm;Sold as a complete set, can be directly integrated into Oeabt® cage or free-space systems;The galvanometer adopts a moving-magnet motor with fast response;The driver is equipped with an internal PD closed-loop control circuit, ensuring high precision of galvanometer operation;Galvanometer products with scanning speeds of 10Kpps/25Kpps are available for users to choose;The pre-installation kit includes a driver, a dual-axis galvanometer motor, a heat sink, a power supply, and an adapter cube;The high-speed scanning galvanometer positioning system is used for integration into light beam manipulation applications with small-diameter light beams (≤5mm).ModelOGS-2AX10KOGS-2AX25KMaximum Beam DiameterØ5mmØ5mmPower Supply Voltage±10V/1A±24V/1AScanning Speed10Kpps25KppsMirror SizeX/Y axis 8*14*1mmX/Y axis 8*14*1mmDriver Board Size85*62*37mm80*50*28mmScale Drift80PPM/℃100PPM/℃Zero Drift/20 urad/℃Repeat Accuracy15 microradians10 microradiansAnalog Signal Input Impedance200k±1%Ω (Differential Input)200k±1%Ω (Differential Input)Position Input Scale Factor0.5 V/°0.5 V/°Analog Position Input Range±5V±5VElectronic Temperature Stability40PPM/℃40PPM/℃Operating Temperature0-50℃0-50℃Scanning Angle±20°±20°Mirror ReflectivitySilver Coating ≥95%Silver Coating ≥95%Linearity>98.0% @45° Incidence (Wavelength Coverage: 380-680nm)>98.0% @45° Incidence (Wavelength Coverage: 380-680nm)Wavelength Range400-1700nm400-1700nmOGS-AC212Adapter CubeMounting Axis: XY Dual Axis; Motor Mounting Hole: Ø12.8mmMounting Axis: XY Dual Axis; Motor Mounting Hole: Ø12.8mmInput Port: SM05 and SM1 Internal Thread; 4 places of 4-40*4, compatible with 30mm cageInput Port: SM05 and SM1 Internal Thread; 4 places of 4-40*4, compatible with 30mm cageOutput Port: SM2 Internal ThreadOutput Port: SM2 Internal ThreadScrew Hole Type: Bottom: 2 places of M3*2, 3 places of M4*3, 2 places of M6*2; Top: 2 places of M6*2Screw Hole Type: Bottom: 2 places of M3*2, 3 places of M4*3, 2 places of M6*2; Top: 2 places of M6*2CurveTechnical Description(1) The high-speed scanning galvanometer positioning system is used for integration into light beam manipulation applications with small-diameter light beams (≤5mm).(2) During initial setup, a drive signal generator such as DAC or DAQ is required to drive the galvanometer driver. The front-end controller of the DAC may involve different galvanometer control protocols, such as the IRDA protocol for laser animation performances or the XY2-100 protocol for laser marking. Users can choose the corresponding protocol to control the galvanometer system according to different applications.(3) XY dual-axis motor, providing galvanometers with scanning speeds of 10Kpps or 25Kpps. Oeabt also offers a variety of installation solutions such as free-space and cage systems to integrate the galvanometer system into your optical system.AssemblyApplication ExamplesEngineering Drawings电源Engineering Drawing驱动器 散热板Engineering Drawing双轴振镜立方Engineering Drawing
