DescriptionProduct DescriptionTwo-axis mount for Ø1-inch D-shaped lenses.Adjustment range: ±4°, 0.5° per turn.Can be mounted horizontally or vertically.Maximum component mounting thickness: 6.35mm.M4 counterbores for rod mounting.The D-shaped optical adjustment mount is specifically designed for mounting Ø1-inch (25mm) D-shaped or circular mirrors, supporting optical lenses with a minimum thickness of ≥2.8mm and a maximum thickness of ≤6.35mm.ModelBMD1Dimensions49.9*49.9*20.2mmMounted ComponentsØ1-inch (25mm) circular/D-shaped optical components, thickness ≥2.8mm and ≤6.35mmAdjustment Range±4° tilt (pitch and yaw), 0.5° per turnScrew Hole Type2*M4 counterboresWeight67.4gMaterialAluminum alloySchematic DiagramTechnical Description(1) The D-shaped optical adjustment mount is specifically designed for mounting Ø1-inch (25mm) D-shaped or circular mirrors, supporting optical lenses with a minimum thickness of ≥2.8mm and a maximum thickness of ≤6.35mm. The lens is fixed and installed in the mount via two nylon screws. With a compact design, this mount maximizes the light-passing space, making it particularly suitable for beam selection applications and effectively avoiding blocking other light beams.(2) The mount has an angular adjustment range of ±4°, achieving an adjustment precision of 8mrad (0.5°) per turn through two M6*0.35 adjusters. Its structural design allows users to perform fine angular control of optical components to optimize the direction of the reflected beam.(3) In addition, the mount is equipped with 2 M4 counterbores, enabling vertical or horizontal installation on Ø1/2-inch rods. It provides flexible mounting methods to meet the configuration requirements of different experiments or optical systems.AssemblyApplication ExampleEngineering Drawing
