DescriptionProduct DescriptionProvides 5-axis (pitch, yaw, and XYZ) adjustment with lockable function.Suitable for Ø1-inch or Ø2-inch optical components.Available with SM1 or SM2 threaded mount options.M4 counterbores for rod mounting.The 5-axis optical adjustment mount supports the adjustment of optical components in 5 axes: pitch, yaw, X, Y, and Z. All five axes are equipped with locking mechanisms to ensure the stability of the optical component’s position after adjustment.ModelMKX5-T1MKX5-T2Dimensions64.4*64.4*53.3mm91.0*91.0*54.2mmCentral ApertureSM1 (1.035”-40) internal threadSM2 (2.035”-40) internal threadMounted ComponentsCompatible with Ø1-inch, thickness ≤10.5mmCompatible with Ø2-inch, thickness ≤11.5mmAdjustment Range – Tilt/Yaw±4° (8mrad/rev)±3° (4.6mrad/rev)Adjustment Range – X/Y Axes±1mm (0.25mm/rev)±2mm (0.25mm/rev)Adjustment Range – Z AxisMaximum translation 6.4mm (0.35mm/rev)Maximum translation 7.6mm (0.35mm/rev)Counterbore Type2*M4 counterbores6*M4 counterboresWeight152.6g256.0gMaterialAluminum alloy Stainless steelAluminum alloy Stainless steelSchematic DiagramTechnical Description(1) The 5-axis optical adjustment mount supports the adjustment of optical components in five axes: pitch, yaw, X, Y, and Z. All five axes are equipped with locking mechanisms to ensure the stability of the optical component’s position after adjustment. The adjustment screws for controlling pitch, yaw, and Z-axis translation can be locked with a 2mm hex wrench, while the X and Y axes are locked with a 0.9mm hex wrench. In addition, the mounting slot frame is provided with vertical and horizontal scale lines to help users reference the alignment of the mounting slot during X and Y axis adjustments.Adjustment RangeMKX5-T1MKX5-T2Tilt/Yaw±4° (8mrad/rev)±3° (4.6mrad/rev)X/Y Axes±1mm (0.25mm/rev)±2mm (0.25mm/rev)Z AxisMaximum translation 6.4mm (0.35mm/rev)Maximum translation 7.6mm (0.35mm/rev)(2) The translation slot of the adjustment mount is equipped with SM1 (1.035”-40) or SM2 (2.035”-40) internal threads, facilitating the installation of Ø1-inch (thickness ≤10.5mm) or Ø2-inch (thickness ≤11.5mm) optical components. One retaining ring is included for fixing the optical component.(3) The bottom of the adjustment mount is designed with M4 counterbores at 90° to each other. Users can install different configurations via Ø12mm rods to meet the operational requirements in different experimental systems.AssemblyApplication ExampleEngineering Drawing
