DescriptionProduct DescriptionOffers ±4° pitch adjustment and ±2mm translation along the Z-axis.Ideal for prisms, rectangular, or circular optical components when used with pressure arms/optical component mounts.Multi-thread array on the tabletop.M4 screw hole at the bottom for connecting rods in free-space setups.The LB-A3 tilt adjustment mount is equipped with three adjusters on the back, providing pitch adjustment with a range of ±4°.ModelLB-A3DimensionsØ50.3*17.0mmThread Type5 M3 screw holes, 5 M4 screw holesAdjustment Range±4° pitch adjustment, ±2mm Z-axis liftWeight75.8gMaterial7075 aluminum alloyTechnical DescriptionThe LB-A3 tilt adjustment mount is equipped with three adjusters on the back, providing pitch adjustment with a range of ±4°.The tabletop is equipped with 5 M3 screw holes and 4 M6 screw holes, compatible with pressure arms or optical component mounts for clamping and installing rectangular, square, or circular optical components onto the adjustment mount. The PRK3-A30 pressure arm can clamp prisms up to 25.4mm. The LFM1-A rectangular filter mount can install filters with a thickness less than 3mm and a width of 28-40mm, while the LFM1-B can install Ø1-inch optical components up to 6.2mm thick.The bottom of the platform is equipped with one M4 screw hole, allowing direct installation onto our Ø12mm rods.AssemblyApplication ExampleEngineering Drawing DownloadLB-A3 Engineering Drawing
