DescriptionProduct DescriptionUsed for installing and positioning 12mm rod holders or Ø1-inch rods.Standard base: Installs rod holders via counterbored holes at the bottom.Flexible clamping base: Flexibly clamps rod holders through limit holes, enabling rough 360° rotation.Stainless steel base: Made of solid 303 stainless steel. CFJP-B-S is compatible with Ø25mm or Ø1-inch rods; CFEP-B-S can install Ø1.5-inch rods. Slotted holes for M6 cap screws allow installation on breadboards or optical platforms.Multiple base options are available, commonly used for positioning and fixing 12mm, Ø1-inch, and Ø1.5-inch rod holders on optical platforms.ModelCompatible InstallationsDimensionsSlot/Hole TypeWeightMaterialM-BASE-HØ12mm-Ø12.7mm rods and rod holders58.4*25*10mm1x M6 counterbore; 1x Ø6.7*27.9mm slotted hole29.3g7075 aluminum alloyM-BASE-2HØ12mm-Ø12.7mm rods and rod holders75*25*10mm1x M6 counterbore; 2x Ø6.5*17.4mm slotted holes40g7075 aluminum alloyM-BASEØ12mm-Ø12.7mm rods and rod holders75*50*10mm2x M6 counterbores; 1x Ø6.625mm counterbored slot; 2x Ø6.631.4mm slotted holes71.1g7075 aluminum alloyM-BASE-F1Ø12mm-Ø12.7mm rods and rod holders100*50*10mm6x M4 holes; 9x M6 counterbores; 2x Ø6.5*31.8mm slotted holes101.1g7075 aluminum alloyM-BASE-T1Ø25mm rods75*50*12.1mm2x Ø6.5*31.8mm counterbored slots78.2g7075 aluminum alloyCFJP-B-SØ25mm rods70*40*30mm4x M6 counterbores297.9g303 stainless steelCFEP-B-SØ1.5-inch or Ø38mm rodsØ59.6*12.7mm1x M6 hole; 4x Ø6.7*20.8mm U-shaped counterbored slots194.7g303 stainless steelTechnical DescriptionMultiple base options are available, commonly used for positioning and fixing 12mm, Ø1-inch, and Ø1.5-inch rod holders on optical platforms.Base Back SideAssembly Application Example Engineering Drawing DownloadM-BASE-T1 Engineering DrawingM-BASE-H Engineering DrawingM-BASE-F1 Engineering DrawingM-BASE-2H Engineering DrawingM-BASE Engineering DrawingCFJP-B-S Engineering DrawingCFEP-B-S Engineering Drawing
