DescriptionProduct DescriptionMechanically manually driven with bidirectional steel wire drive and ball bearingsHigh-precision ball bearing drive for extremely smooth movement without jammingXY-axis movement range: 78mm (X-axis) * 54mm (Y-axis)Stage with a graduated scale of 1mm division and a vernier scale of 100μmS/N0009 series with built-in detachable sample holder, compatible with standard glass slides (thickness approx. 0.8-1.2mm)S/N0010 series with detachable stage plate, stage size: 240*170mmRight-hand and left-hand operation options availableThe stage adopts ball bearing drive, with a vernier scale of 100μm precision on the edge of each axis for easy sample positioning. Manual Microscopy Stage Platform Size135*85mmMovement RangeX-axis: 78mm, Y-axis: 54mm; Total Travel: 78*54mmScale Division1mm divisionVernier Scale100μmMaximum Load2kgControl MethodLeft/right-hand operation, coaxial knobs for X/Y axes (stacked up and down)Dovetail TypeFemale dovetail groove: Ø108mm, α=60°Material7075 Aluminum AlloyWeight1419.5g Serial NumberBuilt-in AccessoryControl MethodS/N0009-1Sample HolderRight-hand operationS/N0009-2—Left-hand operationS/N0010-1Large-size Stage PlateRight-hand operationS/N0010-2—Left-hand operation Manual Microscopy Base PlatformGuide Rail HeightStage ConfigurationMCMP-S-350V350mmSuitable for standard glass slide observation, with glass slide holder includedMCMP-S-400V400mm—MCMP-S-500V500mm—MCMP-S-600V600mm—MCMP-T-350V350mmLarge-size stage, compatible with larger samples such as petri dishes and multi-well platesMCMP-T-400V400mm—MCMP-T-500V500mm—MCMP-T-600V600mm— Focusing UnitModelSpecifications MCT-LMP2Lifting Travel40mm, Resolution 2μm Focusing ModeCoarse and fine focusing Maximum Load10kg OPH95-LM1Lifting Travel23mm Focusing ModeCoarse focusing Maximum Load2kgStage Movement RangeX-axis: 78mm, Y-axis: 54mm Scale Division1mm division, 100μm vernier scale Maximum Load2kg Control MethodLeft/right-hand operation, coaxial knobs for X/Y axes (stacked up and down) S/N0009Accessory – Sample Holder S/N0010Accessory – Large-size Stage PlateGuide Rail Arm Axis Dimension196.5mmObjective Mount SpecificationRMS (0.8”-36)Component List S/N0009 or S/N0010 Stage, OPH95-V Series 95mm Guide Rail, MCT-LMP2 Focusing Handwheel, LMP2-A Right-Angle Bracket, LMA95-M32 Mounting Arm, ST-M32-RMS Adapter, OPH95-LM1 Focusing Slide, LMA95-Olympus Mounting Arm, OOP95-M Slider Accessory – Sample Holder Serial NumberS/N0011Specifications128.8128.01.2mmClamping Size76*26mm, Thickness 0.8-1.2mmMaterial304 Stainless SteelWeight136.4g Large-size Stage Plate Serial NumberS/N0012Specifications240.0170.02.0mmStage Size240.0*170.0mmMaterial7075 Aluminum AlloyWeight213.1gTechnical Description(1) The stage adopts ball bearing drive, enabling 78mm movement on the X-axis and 54mm movement on the Y-axis. A vernier scale with 100μm precision is provided on the edge of each axis for convenient sample positioning. The black knobs under the translation stage can independently adjust the displacement of the X and Y axes, and the stainless steel knobs adjust the damping tightness. Important Note: The damping adjustment knobs cannot be used as locking devices! Do not attempt to tighten the damping to fix the stage position, as this will damage the transmission mechanism!(2) Scale Reading: Total travel of 78mm (X-axis) * 54mm (Y-axis), with a 1mm scale division and a 100μm vernier scale. (3) S/N0009 is suitable for standard glass slide observation and comes with a glass slide holder; S/N0010 is equipped with a large-size stage, compatible with larger samples such as petri dishes and multi-well plates.AssemblyApplication ExamplesEngineering Drawing DownloadS N0012 Engineering DrawingS N0011 Engineering DrawingS N0010-1 Engineering DrawingS N0009-1 Engineering DrawingMCMP-V Engineering Drawing
